Enter Reader Configuration

AMHKGMHOFNGNENEIEPANHOGOCK

AHPNIBAMDKEOFMHMLJALFCAFIK

AKCBPJCJGIIJCMCEGOODCCEDJK

AEFBJLBGMHPLNPGLABJHFIAEGK

AAPHBAJICCBGBIAFNLNLLAINDK

AFLFBPPCOIHKILNFFOCKOLJILK

DLDDLDDLDDLLLLLDDDLDDLDLLL

WEDGE

Exit and Save Reader Configuration

AMHKCMHOFNGNENEIEPANHOGOCK

AHPNIBAMDKEOFMHMLJALFEGFIK

AKCBPJCJGIIJCMCEGLJKNEBJLK

AEFBJLBGMHPLMIFPAFAIIBNHGK

AAPHBAJIDGDHOJDKAICECIENBK

AGLFBOMJMHLIGBPCKIGAGOEKLK

DDLDLDDLLLDLLLLDDDDDDLDLDL

USA

AOCOCOHMHNGNENEIEPANHOGOCK

AHHPMJAMDKEOFMHMLJALFHCGIK

AKCBPJCJGIIJCMCFHONBADFLJK

AEFBJLBGMHPKNIEKDOIAILNEGK

AAPHBAJJCEHMLKBNKBBBBBCHFK

AHKFALMFNCNOMKPODNGAEGPIIK

DDLLLLLDLDLLLLLDLDDDDLDLLL

KEYBOARD SETTING

The values set by this procedure are not effected by the Restore Default code but will be lost if the Interface Selection code is read.

Set Alphanumeric Keys

AOCOBLHMHNGNENEIEPANHOGOCK

AHPNIJAMDKEOFMHMLJAKEFHEIK

AKCBPJCJGIIJCMCFHKIFCIDNNK

AEFBJLBGMHPKNOEFDMIDAIKGGK

AAPHBAJJDBGBFEFKLAHODLCLBK

AELFAONNHNGEOMLLCMDAAFDLLK

DDLLLLLDLLLLLLLDDDLDDLDLLL

The reader can be used with terminals or PCs with various keyboard types and nationalities through a simple keyboard setting procedure.

Keyboard setting consists of communicating to the reader how to send data corresponding to the keyboard used in the application. The keys must be set in a specific order.

Press and release a key to set it.

Some characters may require more than one key pressed simultaneously during normal use (refer to the manual of your PC or terminal for keyboard use). The exact sequence must be indicated to the reader in this case pressing and releasing the different keys.

Example:

If one has to press the "Shift" and "4" keys simultaneously on the keyboard to transmit the character "$" to the video, to set the "$", press and release "Shift" then press and release "4".

Each pressed and released key must generate an acoustic signal on the reader, otherwise repress the key. Never press more than one key at the same time, even if this corresponds to the normal use of your keyboard.

Press "Backspace" to correct a wrong key entry. In this case the reader emits a wrong beep.

Note: "CAPS LOCK" and "NUM LOCK" must be off before starting the keyboard setting procedure. "SHIFT" must be repressed for each character and cannot be substituted by "CAPS LOCK".

1.Read the "Set Alphanumeric Keys" code.

2.Press the keys shown in the following table according to their numerical order.

35