POWERSCAN® D8530
4.Make all PC system connections as shown in Figure 5:
Figure 5 – PC Wedge Connection
5.Power up your PC.
When not using the PowerScan® D8530 reader remember to disconnect the Wedge interface from the PC before disconnecting the power cord.
CAUTION
While using the PowerScan® D8530 it is always necessary to use cables adopting an external power supply.
NOTE
3.3USB INTERFACE SELECTION
The PowerScan® D8530 reader requires the USB interface cable and the AC/DC power adapter to be connected.
The USB interface is compatible: |
|
Windows 98 (and later) | IBM POS for Windows |
Mac OS 8.0 (and later) | 4690 Operating System |
To install and configure your reader with one of the USB interfaces, follow these instructions.
1.Make all the PowerScan® D8530 reader connections as shown in Figure 6;
14