POWERSCAN® D8530
4.1 DEFAULT SETTINGS
Configuration Field | Default Setting |
| |
Baud Rate | 115200 |
Parity, Data Bits, Stop Bits | No parity; 8 Data bits; 1 Stop bit |
Handshake | None |
ACK/NACK Protocol | None |
FIFO | Enabled |
Intercharacter Delay | 0 |
Intercode Delay | 0 |
RX Timeout | 10 seconds |
Serial Trigger Lock | Disabled |
Serial Trigger Lock Disable Character | NUL |
Serial Trigger Lock Enable Character | NUL |
USB COM Emulation |
|
Handshake | None |
ACK/NACK Protocol | None |
FIFO | Enabled |
Intercharacter Delay | 0 |
Intercode Delay | 0 |
RX Timeout | 10 seconds |
USB Keyboard Emulation |
|
FIFO | Enabled |
Intercharacter Delay | 0 |
Intercode Delay | 0 |
*Keyboard Nationality | USA |
*Keyboard Speed | Normal |
| |
*Keyboard Nationality | USA |
CapsLock | OFF |
CapsLock | ON |
NumLock | OFF |
Intercharacter Delay | 0 |
Intercode Delay | 0 |
Data |
|
Code Identifier | Disabled |
Custom Code Identifier | Disabled |
Code Length | Disabled |
*Header | No headers |
*Terminator | CR and LF terminators for |
| BULK, USB COM, USB Generic HID |
| ENTER terminator for Wedge, USB Kbd |
* The default values of these parameters are set when reading the interface selection.
18