|
| CONFIGURATION USING CODE SYMBOLS | ||
|
|
|
| |
| Configuration Field |
| Default Setting | |
| Data |
|
|
|
| Symbology Specific Format |
| Select All | |
| Header Symbology |
| No headers | |
| Terminator Symbology |
| No terminators | |
| Symbology Character Substitution |
| No character to substitute | |
| Symbology Character Deletion |
| No character to delete | |
| Data |
|
|
|
| Concatenation |
| Disabled | |
| Define Concatenation |
| 2 EAN/UPC codes concatenated | |
| Set First Concatenated Code Length |
| 000 = any length | |
| Set Second Concatenated Code Length |
| 000 = any length | |
| Set Third Concatenated Code Length |
| 000 = any length | |
| Set Fourth Concatenated Code Length |
| 000 = any length | |
| Concatenation with Intercode Delay |
| Disabled | |
| Concatenation Timeout |
| 10 seconds | |
| Concatenation Failure Transmission |
| Tx codes causing failure | |
| Transmission after Timeout |
| No code transmission | |
| Concatenation Result Code ID |
| No code Identifier | |
| Advanced Formatting |
|
|
|
| Format enable/disable |
| Disabled | |
| Camera Control |
|
|
|
| Exposure Mode |
| Automatic, based on entire image | |
| Power Save |
|
|
|
| Illumination Power |
| Max power | |
| Illumination System Power |
| ON | |
| Code Selection |
|
|
|
| Issue Identical Codes |
| Enabled | |
| EAN/UPC |
|
|
|
| Selection |
| Enabled | |
|
| Disabled | ||
| UPCE Expansion |
| Disabled | |
| Code 39 |
|
|
|
| Selection |
| Enabled - no check digit | |
| Code39 Full ASCII |
| Disabled | |
| Code Length Check |
| Disabled | |
| Minimum Length |
| 001 |
|
| Maximum Length |
| 255 |
|
| Start/Stop Character |
| Disabled | |
|
|
|
| 19 |
|
|
|
|