POWERSCAN® D8530
5.Install the USB driver on your PC (the first time only) to complete the connection.
•For USB Bulk the relevant files and drivers must be installed from the
•For USB COM the relevant files and drivers must be installed from the USB Device Installation software which can be downloaded from the web site http://www.scanning.datalogic.com.
•For USB Keyboard and for USB Generic HID the correct USB driver is included in the Host Operating System and will either be loaded automatically or will be suggested by the O.S. and should therefore be selected from the dialog box.
The PowerScan® D8530 reader is a USB
NOTE
If you need to change the USB device interface, after having reconfigured the reader, you have to disconnect and reconnect the cable to the PC.
NOTE
16