Setup Mode

1.Press the < and > keys to move from one numeral to another.

2.Press the + and - keys to adjust a numeral up or down.

3.To switch between feet and meters, press 2ND then press UNITS.

4.If you are below sea level, like in Death Valley or the Salton Sea, first enter the ele- vation as a positive number. Then, select the “0” immediately to the left of the left- most non-zero digit (the second zero from the left in 0026, for example, or the first zero from the left in 0207) and press the + and - keys to switch from a positive to negative elevation.

Note:

You can only set the elevation to negative after you have entered a non-zero digit

 

and when the zero in the position immediately to the left of the left-most non-zero

 

digit has been selected.

5.Press DONE to move to the next screen.

Screen 11: Wind Cup Size

Vantage Pro2 stations come standard with large wind cups. Switch this setting to SMALL CUP if you have separately purchased and installed small wind cups. Switch to OTHER if you are receiving from a Vantage Vue ISS or are using a third-party ane- mometer.

Note:

Large wind cups are more sensitive to low wind speeds and are the best choice for

 

most users.

 

 

 

 

 

 

Screen 11: Wind Cup Size

1.Press the + and - keys to switch between the LARGE CUP, SMALL CUP, and OTHER wind cup settings.

2.Press DONE to move to the next screen.

15

Page 18
Image 18
Davis Instruments 6152C manual Screen 11 Wind Cup Size