Alarm Mode
Vantage Pro2 Station AlarmsVantage Pro2 Station Alarms
Variable | Alarms | |
|
| |
Barometric Pressure Trend | Storm Warning - uses trend value falling rate | |
Storm Clearing - uses trend value rising rate | ||
| ||
|
| |
Evapotranspiration | ET Alarm - uses total ET for the day | |
|
| |
Humidity, Inside | High and Low | |
|
| |
Humidity, Outside | High and Low | |
|
| |
Dew Point | High and Low | |
|
| |
Leaf Wetness | High and Low | |
|
| |
Rain | Flash Flood Alarm - uses current 15 minute rainfall total | |
24 Hour Rain Alarm - uses current 24 hour rainfall total | ||
| ||
|
| |
Storm | Storm Alarm - uses current storm rainfall total | |
|
| |
Rain Rate | High | |
|
| |
Soil Moisture | High and Low | |
|
| |
Solar Radiation | High | |
|
| |
Inside Temperature | High and Low | |
|
| |
Outside Temperature | High and Low | |
|
| |
Extra Temperature | High and Low | |
|
| |
Heat Index Temperature | High | |
|
| |
THSW Index Temperature | High | |
|
| |
Wind Chill Temperature | Low | |
|
| |
UV Radiation Index | High | |
|
| |
UV Radiation MED | High - uses the current total if variable has been reset | |
|
| |
Wind Speed | High | |
|
| |
Time & Date | Yes - the alarm sounds for 1 minute. | |
|
|
Setting the Time Alarm
1.Press ALARM to enter alarm mode. The ALARM and HIGHS icons appear.
2.Press 2ND, then press TIME, then press 2ND again, and then press ALARM. The time field begins blinking.
3.Press the < and > keys to select hours, minutes, or AM/PM.
4.Press + and - keys to change the digit’s value up and down.
5.Press DONE to exit Alarm Mode.
30
