DCS dCS 904 Overview, THE SOFTWARE – THE MENU, Set, Set, Set, Menu, Step, Down, Back, Step, Func, Step, Step, Down, Step, ADC/Data, Entering the Menu

dCS 904 User Manual	Manual for Software Version 1.5x and 1.36
dCS Ltd	June 2000

THE SOFTWARE – THE MENU

Overview

The dCS 904 has many other functions that either need to be accessed only occasionally, or are informative in nature. These functions can be accessed either by the Remote software, running on a PC and connected to the unit by an RS-232 link - or (in most cases) by the Menu. If a function is set by the menu or the Remote, the unit remembers it, and it will be set this way for ever (or until you set it to something different). You can customise your unit in this way. Information only items are displayed for a time, then the display reverts to normal.

Menu buttons are indicated by white text on the front panel. There are for:

	Step	otherwise Overload Level
	Set	otherwise ADC/Data
	Down	otherwise Master/Slave
	Up	otherwise Output Format
	Back	otherwise Noise Shaping
Entering the Menu

The Menu is entered by holding down the Step and then pressing the Set button once. The display will show:

Func

You are now in the menu, and the menu buttons now have their alternate meanings.

Moving through the Menu

Press the Step button again to step through the Menu items listed below. When you reach the required item, press the Set button once to display the current setting, and press again to change its setting. This either toggles the previous state, or causes an information function to read out, or enters a lower level (as in the Tone generator, for example). If you have entered a lower level, pressing Step steps through its options. When you reach the one you want, press Set and then use the Up or Down buttons to increase or decrease a value (such as Level or Frequency on the Tone generator).

If no changes are made in 4 seconds, the unit exits the Menu. When one item has been set, press the Step button again if you wish to continue cycling through the Menu.

There is a knack in doing this easily – once it has been gained, it becomes very easy to use the functions it accesses.

Manual part no: DOC135904 iss 2B2 Page 18 135904ma2b2.pdf file available from website

Contact dCS on + 44 1799 531 999	email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0)	web site: www.dcsltd.co.uk