Manuals / Dell / Home Audio / Stereo System

Dell 350, 110, 100 manual Installing Tab Covers, 8.Securing the System in the Rack

Models: 100 350 110

1 32

Download 32 pages 131 b

Page 16

Figure 1-8. Securing the System in the Rack

3.Move the system back with its inside rail engaging the mounting bracket. Slide the system completely into position and secure it to the rack using the captive fasteners at the outer edge of the front panel (see Figure 1-8).

An internally threaded stud projecting from the front of the tray flanges accepts the captive fastener on the front of the system.

captive

fasteners

Figure 1-8. Securing the System in the Rack

4.Attach the front bezel, if it was removed in step 1, to the system (see the Installation and Troubleshooting Guide for instructions).

Installing Tab Covers

CAUTION: The system’s two-post flush-mount slide assembly does not have a safety stop. Use care when sliding the system in and out of the rack; the system could fall out of the rack, possibly resulting in bodily injury and damage to the system.

1.Push the system completely into the rack.

2.Center the thumbscrew on the tab cover with the clearance hole on the system tab, and align the slot on the tab cover with the opening on the system tab (see Figure 1-9).

1-10 Rack Installation Guide

Image 16

Dell 350, 110, 100 manual Installing Tab Covers, 8.Securing the System in the Rack

Contents

Dell PowerEdge 100 and 110 Appliances and RACK INSTALLATION GUIDEPowerEdge 350 Systems Page Precautions for Rack-MountableProducts Safety InstructionsNotes, Notices, Cautions, and Warnings Page Contents Index Figures Systems - Rack Installation Guide Dell PowerApp 100 and Appliances and PowerEdgeTwo-Post Center-MountRack Kit Installation Rack Kit Contents Recommended Tools and SuppliesMarking the Rack Rack Installation Guide0.5 inch 0.625 inch 1.75 inches 1 U 0.625 inch 0.5 inchAttaching the Brackets Installing the System in the RackFigure 1-3.Securing the System in the Rack Two-Post Flush-MountRack Kit Installation Rack Kit ContentsFigure 1-4. Two-Post Flush-MountRack Kit Contents 1-6Rack Installation GuideRecommended Tools and Supplies inner mounting rails flush-mountbracketsRack Installation Guide Marking the Rack0.5 inch 0.625 inch 1.75 inches 1 U 0.625 inch 0.5 inchInstalling the Bracket in the Rack Figure 1-6.Installing the Bracket in the RackInstalling the System in the Rack Installing the Inner Rails on the System ChassisRack Installation Guide Installing Tab Covers Figure 1-8.Securing the System in the RackFour-PostRack Kit Installation Figure 1-9.Installing the Tab Coverthumbscrew server tabFigure 1-10. Four-PostRack Kit Contents cable-managementarm assembly1-12Rack Installation Guide slide assemblies with mounting brackets 1 pairBefore You Begin Installing the Rack KitRecommended Tools and Supplies Removing the Doors From the 42-URack Figure 1-11.Opening the 42-URack DoorFigure 1-12.Removing the 42-URack Doors Figure 1-13.Opening the 24-URack Door Removing the Doors From the 24-URack1-16Rack Installation Guide Rack Installation Guide Figure 1-14.Removing the 24-URack Doorshinge pin hinge insert hinge Figure 1-15.One Rack Unit Figure 1-16.Using Template to Mark Vertical Rails Figure 1-17.Installing the Slide Assemblies front of rackInstalling the Inner Rails on the System Chassis Installing the System in the Four-PostRackFigure 1-18.Installing the Inner Rails Installing the Cable-ManagementArm Figure 1-19.Installing the System in the RackFigure 1-20.Installing the Cable-ManagementArm Replacing the Rack Doors on a 42-URack Replacing the Rack DoorsReplacing the Rack Doors on a 24-URack Index