Dell 100, 110 Four-PostRack Kit Installation, 9.Installing the Tab Cover, thumbscrew, server tab

thumbscrew

server tab

Figure 1-9. Installing the Tab Cover

3.Hold the tab cover firmly onto the server tab and engage the thumbscrew with the receiving fastener on the slide bracket.

4.Repeat steps 1 through 3 to install the tab cover on the other side of the system. This completes the two-post flush-mount rack installation.

Four-Post Rack Kit Installation

This procedure provides instructions for installing a Dell system in a four-post rack cab- inet. Both 24-U and 42-U racks are accommodated.

Rack Kit Contents

The rack kit includes the following items (see Figure 1-10):

•

•

•

•

•

One pair of slide assemblies

One cable-management arm

Four 10-32 x 0.5-inch pan-head Phillips screws

Six 10-24 x 0.375-inch pan-head Phillips screws

One 1-U template for a four-post rack

NOTE: If you purchased a Dell rack along with your system, the slide assemblies may be preinstalled in the rack.

support.dell.com Rack Installation Guide 1-11