Replacing the Display Panel

This procedure assumes that you have completed the removal procedure Removing the Display Panel.
1. Replace the eight M2 x 3-mm screws in the display panel.
2. Position the display panel assembly in the top cover.
3. Replace the camera/microphone assembly (see Replacing the Camera and Microphone Assembly).
4. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
5. Replace the two M2 x 5-mm screws in the hinges.
6. Replace the display inverter (see Replacing the Display Inverter).
7. Replace the display bezel (see Replacing the Display Bezel).
8. Replace the display assembly (see Replacing the Display Assembly).
9. Replace the keyboard (see Replacing the Keyboard).
10. Replace the hinge cover (see Replacing the Hinge Cover).
11. Replace the WLAN card (see Replacing a WLAN Card).
12. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
Display Cable

Removing the Display Cable

1. Follow the instructions in Before Working on Your Computer.
2. Remove the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
1
M2 x 5-mm screws (2)
2
display panel
3
M2 x 3-mm screws (8)
4
top cover
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.