Adding Parts 65
8After the hinge arms clip into place, lower and raise the arms two or
three times to properly seat them.
9Reattach the front-panel insert.
10 Reconnect the power cable to your computer.
11 Reattach the front door as described on page62.
CAUTION: Before you begin any of the procedures in this section,
follow the safety instructions listed in "When Working Inside Your
Computer" on page 12.
1Shut down the computer (see page20).
2Turn off any attached devices and disconnect them from their
electrical outlets.
NOTICE: To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network wall jack.
3Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.