Before you reinstall the cover, fold all cables out of the way so that they do not interfere with the cover or with the proper airflow inside the computer.
When you boot the system, you will need to reset the chassis intrusion detec- tor by entering the System Setup program and changing the Chassis Intrusion setting to Not Detected. See Appendix A for information on the System Setup program. If you need further information, see Chapter 3, “Using the System Setup Program,” in the User’s Guide.
NOTES: After removing and replacing the cover, the chassis intrusion detector will cause the following message to be displayed at the next system
ALERT! Cover was previously removed.
If a setup password has been assigned by someone else, contact the network administrator for information on resetting the chassis intrusion detector.
