Dell 620s manual Installed Removed Sound

1 PCI Express x16 card slot 2 PCI Express x16 card

4.Replace the card retention bracket (see Replacing the Card Retention Bracket).

5.Connect any cables that should be attached to the card.

See the documentation that shipped with the card for information about the card's cable connections.

CAUTION: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

6.Replace the computer cover (see Replacing the Computer Cover).

7.Reconnect the computer and devices to electrical outlets, and then turn them on.

8.To complete the installation, see Configuring Your Computer After Removing or Installing the PCI Express Card.

Configuring Your Computer After Removing or Installing the PCI Express Card

NOTE: For information about the location of external connectors, see the Setup Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card.

	Installed		Removed
Sound	1.	Enter system setup (see	1.	Enter system setup (see
card		System Setup).		System Setup).
	2.	Go to Onboard Audio	2.	Go to Onboard Audio
		Controller and then		Controller and then
		change the setting to		change the setting to
		Disabled.		Enabled.
	3.	Connect the external	3.	Connect the external
		audio devices to the		audio devices to the
		sound card's connectors.		computer's back panel
				connectors.
Network	1.	Enter system setup (see	1.	Enter system setup (see
card		System Setup).		System Setup).
	2.	Go to Onboard LAN	2.	Go to Onboard LAN
		Controller and then		Controller and then
		change the setting to		change the setting to
		Disabled.		Enabled.
	3.	Connect the network	3.	Connect the network
		cable to the network		cable to the integrated
		card's connector.		network connector.

Back to Contents Page