Processor Information
Processor Type | Displays the processor type | |
|
| |
L2 Cache | Displays the L2 cache size | |
|
| |
L3 Cache | Displays the L3 cache size | |
|
|
|
Memory Information |
|
|
|
| |
Memory Installed | Indicates the amount of memory installed in MB | |
Memory Speed | Indicates the memory speed in MHz | |
|
| |
Memory Technology | Indicates the type of installed memory | |
|
| |
Memory Channel | Indicates single channel or dual channel mode | |
|
|
|
Device Information |
|
|
SATA 0 | Displays the SATA drive connected to the SATA 0 connector | |
|
| |
SATA 1 | Displays the SATA drive connected to the SATA 1 connector | |
|
| |
SATA 2 | Displays the SATA drive connected to the SATA 2 connector | |
|
| |
SATA 3 | Displays the SATA drive connected to the SATA 3 connector | |
|
|
|
Advanced |
|
|
|
| |
CPU Configuration | • | |
| • Active Processor Cores — All; 1; 2; 3 (All by default) | |
| • Limit CPUID Value — Enabled or Disabled (Disabled by default) | |
| • CPU XD Support — Enabled or Disabled (Enabled by default) | |
| • Intel Virtualization Technology — Enabled or Disabled (Enabled by default) | |
| • Intel SpeedStep — Enabled or Disabled (Enabled by default) | |
| • Intel Turbo Boost Technology — Enabled or Disabled (Enabled by default) | |
| • CPU C6 Report — Enabled or Disabled (Enabled by default) | |
|
|
|
Graphics | • | Intel Multiple Monitor Feature — Enabled or Disabled (Disabled by default) |
Configuration |
|
|
|
| |
System Configuration | • Onboard Audio Controller — Enabled or Disabled (Enabled by default) | |
| • Onboard LAN Controller — Enabled or Disabled (Enabled by default) | |
| • Onboard LAN Boot ROM — Enabled or Disabled (Disabled by default) | |
| • SATA Mode — AHCI; RAID (AHCI by default) | |
| • USB Controller — Enabled or Disabled (Enabled by default) | |
| • USB Storage Boot Function — Enabled or Disabled (Enabled by default) | |
| • Onboard Card Reader — Enabled or Disabled (Enabled by default) | |
| • Onboard Serial Port — Enabled or Disabled (Enabled by default) | |
| • Serial Port IO Address/IRQ — 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4, 2E8h/IRQ3 (3F8h/IRQ4 by default) | |
|
| |
Power Management | • Restore AC Power Loss — Power Off; Power On; Last State (Power Off by default) | |
| • Wake on LAN from S4/S5 — Enabled or Disabled (Disabled by default) | |
| • USB Powershare in S4/S5 State | |
| • USB Powershare in Sleep State — Normal; Enhanced (Normal by default) | |
| • Resume by PS/2 Devices — Enabled or Disabled (Enabled by default) | |
| • Auto Power On — Enabled or Disabled (Disabled by default) | |
| • Auto Power On Date — 0 to 31, 0 for everyday (15 by default) | |
| • Auto Power On Hour — 0 to 23 (12 by default) | |
| • Auto Power On Minute — 0 to 59 (30 by default) | |
| • Auto Power On Second — 0 to 59 (30 by default) | |
|
| |
Post Behavior | • Bootup NumLock State — On; Off (On by default) | |
| • | Keyboard Error Report — Enabled; Disabled (Enabled by default) |
|
|
|
Security |
|
|
|
| |
Admin Password | Allows to set, change, or delete the administrator password when the service tag is present | |
| NOTE: Deleting the administrator password will delete the system password. Hence, the administrator password must be set before | |
| setting the system password. | |
System Password | Allows to set, change, or delete the system password when the service tag is present | |
|
| |
Boot Menu Security | Enabled or Disabled | |
| User must enter Admin Password to access the F12 Boot Menu when this setting is enabled (Disabled by default) | |
|
| |
HDD Protection | Enabled or Disabled (Disabled by default) | |
Feature |
|
|
|
|
|
Boot |
|
|
|
| |
1st Boot Priority | Specifies the boot sequence from the available devices | |
| Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (Hard Disk by default) | |
|
| |
2nd Boot Priority | Specifies the boot sequence from the available devices | |
| Hard Disk; CD/DVD; Network; USB Floppy; USB Hard Disk; USB CD/DVD; Disabled (CD/DVD Drive by default) | |
|
|
|
