Configuring Your Computer After Removing or Installing the
NOTE: For information about the location of external connectors, see the Quick Start Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card.
Installed
Sound card 1 Enter system setup. See "System Setup" on page 73.
2 Go to Onboard Audio Controller and then change the setting to Disabled.
3 Connect the external audio devices to the sound card’s connectors.
Network card 1 Enter system setup. See "System Setup" on page 73.
2 Go to Onboard LAN Controller and then change the setting to Disabled.
3 Connect the network cable to the network card’s connector.
Removed
1 Enter system setup. See "System Setup" on page 73.
2 Go to Onboard Audio Controller and then change the setting to Enabled.
3 Connect the external audio devices to the computer’s back panel connectors.
1 Enter system setup. See "System Setup" on page 73.
2 Go to Onboard LAN Controller and then change the setting to Enabled.
3 Connect the network cable to the integrated network connector.
28
