Dell 660S manual Replacing the PCI-Express Cards

Replacing the PCI-Express Cards

Procedure

1Prepare the card for installation.

See the documentation that shipped with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

2Replace the PCI-Express card:

PCI-Express x1 card — Place the PCI-Express card in the connector on the system board and press down firmly. Ensure that the PCI-Express card is fully seated in the connector.

PCI-Express x16 card — Press down the securing tab and place the PCI- Express card in the connector on the system board and press down firmly. Ensure that the PCI-Express card is fully seated in the connector.

3Connect any cables that should be attached to the card.

See the documentation that shipped with the card for information about the card’s cable connections.

CAUTION: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

Postrequisites

1Replace the fan shroud. See "Replacing the Fan Shroud" on page 20.

2Replace the computer cover. See "Replacing the Computer Cover" on page 18.

3Follow the instructions in "After Working Inside Your Computer" on page 11.

4To complete the installation, see "Configuring Your Computer After Removing or Installing the PCI-Express Card" on page 28.

PCI-Express Cards

27