Replacing the Front I/O Panel

1Insert the front I/O panel clamps into the slots on the front panel.

2Slide the front I/O panel toward the side. Ensure that the screw hole on the front I/O panel aligns with the screw hole on the front panel.

3Replace the screw that secures the front I/O panel to the front panel.

4Route the front I/O panel cables through the routing guides on the chassis.

5Connect the front I/O panel cables to the system-board connectors (USBF1, USBF2, and AUDF1 ). See "System Board Components" on page 15.

1Replace the PCI-Express x16 card, if applicable. See "Replacing the PCI- Express Cards" on page 27.

2Replace the drive cage. See "Replacing the Drive Cage" on page 39.

3Replace the front bezel. See "Replacing the Front Bezel" on page 35.

4Replace the fan shroud. See "Replacing the Fan Shroud" on page 20.

5Replace the computer cover. See "Replacing the Computer Cover" on page 18.

6Follow the instructions in "After Working Inside Your Computer" on page 11.

Front I/O Panel

Dell 660S manual Replacing the Front I/O Panel