18 Setting Up the Monitor

CAUTION: Do not use benzene, thinner, ammonia, abrasive cleaners, or
compressed air.
• Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent
of any kind as some detergents leave a milky film on the monitor.
• Ifyounoticewhitepowderwhenyouunpackyourmonitor,wipeitowithasoft
and clean cloth.
• Handleyourmonitorwithcaretoavoidscratchesandscumarks.
• Tohelpmaintainthebestimagequalityonyourmonitor,useadynamically
changing screen saver and turn o your monitor when not in use.

Setting Up the Monitor

Attaching the Stand

NOTE: The stand is detached from monitor when it is shipped from the
factory.
NOTE: If you purchased a dierent stand for your monitor, see the
documentation for that stand for setup instructions.
To attach the monitor stand:
1. Place the monitor on a flat surface.
2. Insert the two tabs on the upper part of the stand to the groove in the back
of the monitor.
3. Press-down on the stand till it snaps into its place.