Dell R820, E21S001 owner manual SD vFlash Card, Installing Expansion-Card Risers

Figure 38. Connectors on the Expansion Card Riser 3

1.chassis intrusion switch

3.expansion-card connector (slot 7)

2.expansion-card connector (slot 6)

4.If applicable, remove or install an expansion card on the riser.

5.Replace the expansion-card riser.

6.Close the system.

7.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing Expansion-Card Risers

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.If applicable, reinstall the expansion card(s) into the expansion card riser.

2.Align the expansion-card riser with the connector and the riser guides on the system board.

3.Lower the expansion-card riser until the expansion-card riser is firmly seated.

4.Close the system.

5.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

6.Install any device drivers required for the card as described in the documentation for the card.

SD vFlash Card

A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistent on-demand local storage and a custom deployment environment that allows automation of server configuration, scripts, and imaging. It emulates USB device(s). For more information, see the iDRAC7 User's Guide at dell.com/support/ manuals.

75