Dell E21S001, R820 owner manual Installing Memory Modules, Ejecting The Memory Module

5.To release the memory-module blank from the socket, simultaneously press the ejectors on both ends of the memory module socket.

CAUTION: Handle each memory module only by the card edges, making sure not to touch the middle of the memory module or metallic contacts. To avoid damaging the memory module, handle only one memory module at a time.

Figure 18. Ejecting The Memory Module

1. memory module 2. memory-module socket ejectors (2)

3.memory-module socket

6.If a memory module or a memory-module blank is installed in the socket, remove it.

NOTE: Retain removed memory-module blank(s) for future use.

Figure 19. Removing The Memory Module

1.memory module/memory-module blank

7.Install the cooling shroud.

8.Close the system.

9.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Installing Memory Modules

WARNING: The memory modules are hot to the touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components or metallic contacts on the memory module.

52