Dell E2210C, E1910, E2210F appendix Product Specific Problems, Dell Soundbar Problems

Horizontal/Vertical Lines	Screen has one or more lines	•	Reset the monitor to Factory Settings.
		•	Perform Auto Adjust via OSD.
		•	Adjust Phase and Pixel Clock controls via OSD.
		•	Perform monitor self-test feature check and determine if these lines are also in self-test
			mode.
		•	Check for bent or broken pins in the video cable connector.
		•	Run the built-in diagnostics.
		NOTE: When using '2: DVI-D', the Pixel Clock and Phase adjustments are not available.
Synchronization Problems	Screen is scrambled or appears	•	Reset the monitor to Factory Settings.
	torn	•	Perform Auto Adjust via OSD.
		•	Adjust Phase and Pixel Clock controls via OSD.
		•	Perform monitor self-test feature check to determine if the scrambled screen appears in
			self-test mode.
		•	Check for bent or broken pins in the video cable connector.
		•	Restart the computer in the safe mode.
Safety Related Issues	Visible signs of smoke or	•	Do not perform any troubleshooting steps.
	sparks	•	Contact Dell immediately.
Intermittent Problems	Monitor malfunctions on & off	•	Ensure that the video cable connecting the monitor to the computer is connected
			properly and is secure.
		•	Reset the monitor to Factory Settings.
		•	Perform monitor self-test feature check to determine if the intermittent problem occurs in
			self-test mode.
Missing Color	Picture missing color	•	Perform monitor self-test feature check.
		•	Ensure that the video cable connecting the monitor to the computer is connected
			properly and is secure.
		•	Check for bent or broken pins in the video cable connector.
Wrong Color	Picture color not good	•	Change the Color Setting Mode in the Color Settings OSD to Graphics or Video
			depending on the application.
		•	Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color
			Settings OSD if the Color Management is turned off.
		•	Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
		•	Run the built-in diagnostics.
Image retention from a static	Faint shadow from the static	•	Use the Power Management feature to turn off the monitor at all times when not in use
image left on the monitor for a	image displayed appears on		(for more information, see Power Management Modes).
long period of time	the screen	•	Alternatively, use a dynamically changing screensaver.

Product Specific Problems

Specific Symptoms	What You Experience		Possible Solutions
Screen image is too small	Image is centered on screen,	•	Reset the monitor to Factory Settings.
	but does not fill entire viewing
	area
Cannot adjust the monitor with	OSD does not appear on the	•	Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
the buttons on the front panel	screen
The picture does not fill the	The picture cannot fill the	•	Due to different video formats (aspect ratio) of DVDs, the monitor may display in full
entire screen.	height or width of the screen		screen.
		•	Run the built-in diagnostics.

NOTE: When choosing DVI-D mode, the Auto Adjust function is not available.

Dell™ Soundbar Problems

Common Symptoms	What You Experience		Possible Solutions
No sound for system where	No power to Soundbar - the	•	Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if
the Soundbar draws power	power indicator is off		the power indicator (green LED) on the front of the Soundbar is illuminated.
from an AC adapter		•	Confirm that the power cable from the Soundbar is plugged into the adapter.
No Sound	Soundbar has power - power	•	Plug the audio line-in cable into the computer's audio out jack.
	indicator is on	•	Set all volume controls to their maximum and ensure that the mute option is not
			enabled.
		•	Play some audio content on the computer (example, audio CD, or MP3).
		•	Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
		•	Clean and reseat the audio line-in plug.
		•	Test the Soundbar using another audio source (For example: portable CD player, MP3
			player).
Distorted Sound	Computer's sound card is used	•	Clear any obstructions between the Soundbar and the user.
	as the audio source	•	Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
		•	Set all Windows volume controls to their midpoints.
		•	Decrease the volume of the audio application.
		•	Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
			setting.
		•	Clean and reseat the audio line-in plug.
		•	Troubleshoot the computer's sound card.
		•	Test the Soundbar using another audio source (For example: portable CD player, MP3
			player).