4. Press plus (+) or minus (–) to change the boot priority of the device.
Clearing Forgotten Passwords
1. Follow the instructions in Before You Begin.
2. Remove the back cover (see Removing the Back Cover).
3. Remove the system-board shield (see Removing the System-Board Shield).
4. Locate the 3-pin password reset jumper (CLR_PWSD) on the system board. (see System Board Components).
5. Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
Inspiron One 2305
Inspiron One 2310
WARNING: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
WARNING: The computer must be disconnected from the electrical outlet to clear the CMOS setting.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).