Back to Contents Page

Front Stand

Dell™ Inspiron™ One 2305/2310 Service Manual

Removing the Front Stand

Replacing the Front Stand

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Removing the Front Stand

1.Follow the instructions in Before You Begin.

2.Remove the back cover (see Removing the Back Cover).

3.Remove the four screws that secure the front-stand assembly to the computer.

4.Lift the rear stand so that the front stand is accessible.

5.Lift the front-stand assembly away from the computer.

1

3

rear stand

2

screws (4)

 

 

 

front-stand assembly

 

 

 

 

 

6.Remove the two screws that secure the I/O bracket to the front stand.

7.Release the five tabs that secure the I/O bracket to the front stand.

8.Remove the I/O bracket from the front stand.

Page 33
Image 33
Dell IO2305-543MSL manual Removing the Front Stand