Paper Handling
zRecommended Paper and Requirements
Media Type | Model*1 | Paper | Paper | Paper | Printer Driver |
|
| Support Load | Output | Thickness | Setting for Media |
|
| Limit | Tray Load | Lever*2 | Type |
|
|
| Limit |
|
|
Plain Paper*3 | — | Around | Around | Left | Plain Paper |
|
| 100 sheets | 50 sheets |
|
|
Envelopes*4 | — | 5 envelopes | *6 | Right | Envelope |
High Resolution | 80 sheets | 50 sheets | Left | High Resolution | |
Paper |
|
|
|
| Paper |
Super White Paper | 80 sheets | 50 sheets | Left | Plain Paper | |
Glossy Photo Paper | A4, Letter, | *6 | Left | Glossy Photo Paper | |
“Everyday Use”*5 |
| 5" x 7" / 127.0 |
|
|
|
|
| x 177.8 mm, |
|
|
|
Matte Photo Paper |
| Left | Matte Photo Paper | ||
|
| and 8" x 10" / |
|
|
|
Photo Paper Glossy |
| Left | Glossy Photo Paper | ||
203.2 x 254.0 |
| ||||
|
|
|
|
| |
Photo Paper Plus |
| Left | Photo Paper Plus | ||
mm: 10 sheets |
| ||||
| 4" x 6" / 101.6 |
|
| ||
Photo Paper Pro*5 | x 152.4 mm |
| Left | Photo Paper Pro | |
Photo Paper Plus | and Wide: 20 |
| Left | Photo Paper Plus | |
Glossy*5 |
| sheets |
|
| Glossy |
Photo Paper Plus |
|
| Left | Photo Paper Plus | |
Glossy II*5 |
|
|
|
| Glossy II |
Photo Stickers | 1 sheet |
| Left | Glossy Photo Paper | |
|
|
|
|
|
|
1 sheet |
| Right | |||
|
|
|
|
|
|
*1 Paper with a Model Number is Canon specialty media. Refer to the instruction manual supplied with the paper for detailed information on the printable side and notes on handling paper. For information on the paper sizes available for each Canon genuine paper, visit our website. You may not be able to purchase some Canon genuine papers depending on the country or region of purchase. Paper is not sold in the US by Model Number. Purchase paper by name.
*2 If the corners or edges of the paper are smudged, try to print with the Paper Thickness Lever set to the right. It may improve print quality.
Reset the Paper Thickness Lever to the left when you finish printing.
For details on the Paper Thickness Lever, refer to “Inside” in “Main Components” of the User’s Guide
*3 Proper feeding of paper may not be possible at the maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to around half (around 0.2 inches / 5 mm in paper stack height).
*4 If envelopes cannot be fed properly, reduce sheets of envelopes in the Rear Tray.
*5 When loading paper in stacks, the print side may be marked as it is fed in or sheets may be stuck to one another causing them not to be fed properly. In this case, load one sheet at a time.
*6 We recommend that you remove the previously printed sheet or envelope from the Paper Output Tray before continuously printing to avoid blurs and discoloration.
Before Using the Printer | 9 |