„Error Number: 300 Is Displayed

Cause

Action

The printer is not ready.

Confirm that the Power lamp is lit green.

 

 

If the Power lamp is off, turn the printer on.

 

 

While the Power lamp is flashing green, the printer is initializing. Wait until the

 

 

Power lamp stops flashing and remains lit green.

 

 

If the Alarm lamp is flashing orange, an error may have occurred in the printer.

 

 

For details on how to resolve the error, see “Alarm Lamp Flashes Orange” on

 

 

page 53.

Printer is not connected properly.

Make sure that the USB cable is securely plugged in to the printer and the

 

 

computer.

 

 

z If you are using a relay device such as a USB hub, disconnect it, connect the

 

 

printer directly to the computer, and try printing again. If printing starts

 

 

normally, there is a problem with the relay device.

 

 

Consult the reseller of the relay device for details.

 

 

z There could also be a problem with the USB cable. Replace the USB cable

 

 

and try printing again.

Your printer is not selected in Printer

Select your printer’s name in Printer on the Print dialog box.

on the Print dialog box.

If your printer’s name does not appear in Printer, follow the procedure below to

 

 

check that the driver for your printer is installed to your computer.

 

 

(1)Select Print & Fax Preferences from Printer.

 

 

In Mac OS X v.10.3.9, select Edit Printer List from Printer.

 

 

(2)Check that your printer’s name is displayed in the list of printers and that the

 

 

check box is selected.

 

 

(3)If your printer’s name is not displayed, click Add(+) to add the printer.

 

 

If you cannot add the printer, follow the procedure described in your setup

 

 

sheet to reinstall the printer driver.

 

 

 

 

 

 

„Error Number: 1700/1710 Is Displayed

Cause

Action

The ink absorber is almost full.

See “Eight flashes: Ink absorber is almost full.” in “Alarm Lamp Flashes Orange”

 

 

on page 53.

 

 

 

 

 

 

„Ink Info Number: 1688 Is Displayed

Cause

Action

Ink has run out.

Refer to “Four Flashes: Ink has run out.” in “Alarm Lamp Flashes Orange” on

 

 

page 53.

 

 

 

 

 

 

„Ink Info Number: 1686 Is Displayed

Cause

Action

Ink level cannot be detected.

Refer to “Sixteen Flashes: Ink level cannot be detected.” in “Alarm Lamp

 

Flashes Orange” on page 53.

56Troubleshooting