Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight Lines Are Misaligned
Cause | Action | ||||
The media is loaded with the wrong | When using paper with one printable surface, make sure the paper is loaded | ||||
side facing upwards. | with the printable side facing up. | ||||
| Printing on the wrong side of such paper may cause unclear prints or prints with | ||||
| reduced quality. | ||||
| Refer to the instruction manual supplied with the paper for detailed information | ||||
| on the printable side. | ||||
FINE Cartridge is not installed properly. | Remove the FINE Cartridge, then reinstall it. | ||||
| The print result may be improved by reinstalling the FINE Cartridge. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Also, check that the protective tape (A) is removed.
| (A) |
|
|
Print Head nozzles are clogged. | See “When Printing Becomes Faint or Colors Are Incorrect” on page 18 and |
| perform any necessary maintenance operations. |
Print Head is misaligned. | If you did not align the Print Head after installation, straight lines may be printed |
| misaligned. Make sure to align the Print Head after you install it. |
| See “Aligning the Print Head” on page 27 to perform Print Head Alignment. |
White Streaks
Cause | Action |
Print Head nozzles are clogged. | See “When Printing Becomes Faint or Colors Are Incorrect” on page 18 and |
| perform any necessary maintenance operations. |
Troubleshooting 47