Dell M4300 manual Removing the Display Panel, Installing the Display Panel

5. Starting from the sides of the display panel, use your fingers to separate the bezel from the top cover and lift the bezel away from the top cover.

Removing the Display Panel

CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

1.Follow the procedures in Before You Begin.

2.Remove the display assembly (see Removing the Display Assembly).

3.Remove the display bezel (see Removing the Display Bezel).

4.Remove the eight M2.5 x 5-mm screws from the display panel.

5.Lift the display panel out of the top cover.

1 M2 x 3-mm screws (8) 2 display panel 3 top cover

Installing the Display Panel

1.Replace the eight M2.5 x 5-mm screws that secure the display panel to the top cover.

2.Route the display feed-flex cable and antenna cables so that they rest in the notch located in the bottom edge of the top cover.

3.Replace the display bezel .

Removing the Display Panel Brackets

CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

1.Follow the procedures in Before You Begin.

2.Remove the display assembly (see Removing the Display Assembly).

3.Remove the display bezel (see Removing the Display Bezel).

4.Remove the display panel (see Removing the Display Panel).

5.Remove the four M2 x 3-mm screws from the right display panel side bracket and lift away the bracket.