Back to Contents Page
Internal Card with Bluetooth®Wireless Technology
Dell™Precision™M4300ServiceManual
If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.
1. Follow the procedures in Before You Begin.
2. Remove the hinge cover (see Hinge Cover).
3. Remove the card from its compartment in the computer.
a. Slide the card to the right.
b. Lift the card out of the computer.
4. Disconnect the card from the card cable connector.
Back to Contents Page
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1
metal tab
2
card
3
NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.
1
card
2
card connector
3
card cable connector