7The final configuration contained in the /etc/iscsi/iscsid.conf file might look like this:

node.session.auth.authmethod = CHAP

node.session.auth.username = iqn.2005- 03.com.redhat01.78b1b8cad821

node.session.auth.password = password_1

node.session.auth.username_in= iqn.1984- 05.com.dell:powervault.123456

node.session.auth.password_in = test1234567890 discovery.sendtargets.auth.authmethod = CHAP

discovery.sendtargets.auth.username = iqn.2005- 03.com.redhat01.78b1b8cad821

discovery.sendtargets.auth.password = password_1

discovery.sendtargets.auth.username = iqn.1984- 05.com.dell:powervault.123456

discovery.sendtargets.auth.password_in = test1234567890

If you are using SUSE Linux Enterprise Server SP3 using the GUI:

1Click DesktopYaSTiSCSI Initiator.

2Click Service Start, then select When Booting.

3Select Discovered Targets, then select Discovery.

4Enter the IP address of the port.

5Click Next.

6Select any target that is not logged in and click Log in.

68

Appendix—Manual Configuration of iSCSI

Page 68
Image 68
Dell MD3200, MD3220 manual Appendix-Manual Configuration of iSCSI