Dell N5110 service manual Removing the Hinge Cover

Models: N5110

1 90
Download 90 pages 9.33 Kb
Page 53
Image 53

11

Hinge Cover

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery" on page 15) before working inside the computer.

Removing the Hinge Cover

1Follow the instructions in "Before You Begin" on page 9.

2Remove the battery (see "Removing the Battery" on page 15).

3Remove the display assembly (see "Removing the Display Assembly" on page 41).

4Remove the four screws that secure the hinge cover to the computer base.

5Push the three tabs that secure the hinge cover to the computer base.

Hinge Cover

53

Page 53
Image 53
Dell N5110 service manual Removing the Hinge Cover