When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated properly.
CAUTION: To avoid damage to the processor, hold the screwdriver perpendicular to the processor when turning the cam screw.
3Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.
4Follow the instructions from step 3 to step 16 in "Replacing the System Board" on page 67.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
Processor Module
81
