20

VGA/Power Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery" on page 15) before working inside the computer.

Removing the VGA/Power Board

1Follow the instructions in "Before You Begin" on page 9.

2Remove the display assembly (see "Removing the Display Assembly" on page 41).

3Follow the instructions from step 2 to step 12 in "Removing the System Board" on page 65.

4Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

5Carefully ease the connectors on the VGA/Power board out of the slots in the base cover, and lift the VGA/Power Board off the base cover.

VGA/Power Board

85

Page 85
Image 85
Dell N5110 service manual Removing the VGA/Power Board