4

Module Cover

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see "Removing the Battery" on page 15) before working inside the computer.

Removing the Module Cover

1Follow the instructions in "Before You Begin" on page 9.

2Remove the battery (see "Removing the Battery" on page 15).

3Loosen the captive screw that secures the module cover to the base cover.

4Using your fingertips, release the tabs on the module cover from the slots on the computer base.

5Lift the module cover off the computer base.

Module Cover

17

Page 17
Image 17
Dell N5110 service manual Removing the Module Cover