4Follow the instructions from step 3 to step 9 in "Removing the Palm-RestAssembly" on page 31.
5Disconnect the display cable and touch-screen cable from the system-board connectors.
NOTE: The touch-screen board is optional and may not be present in your computer.
6Disconnect the Mini-Card antenna cables from the connectors on the Mini-Card(s) (see "Removing the Mini-Card(s)" on page 37).
7Note the routing of the Mini-Card antenna cables and remove the cables from the routing guides.
8Remove the four screws that secure the display assembly to the computer base.
9Lift the display assembly off the computer base.
