Installing the Camera

1.Insert the camera into its place on the display assembly.

2.Connect the camera cable to its connector on the display assembly.

3.Install the:

a.display bezel

b.display assembly

c.battery

d.base cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Power-Connector Port

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a.base cover

b.battery

c.display assembly

3.Perform the following steps:

a.Disconnect the power-connector port cable from its connector on the system board [1].

b.Remove the power-connector port from the computer [2].

17

Page 17
Image 17
Dell P21T owner manual Installing the Camera, Removing the Power-Connector Port