Installing the Power-Connector Port

1.Insert the power-connector port into its place on the computer.

2.Connect the power-connector port cable to its connector on the system board.

3.Install the:

a.display assembly

b.battery

c.base cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Hard-Drive Assembly

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a.base cover

b.battery

3.Perform the following steps:

a.Disconnect the hard-drive cable from its connector on the system board [1].

b.Remove the screws that secure the hard-drive assembly to the computer [2].

18

Page 18
Image 18
Dell P21T owner manual Installing the Power-Connector Port, Removing the Hard-Drive Assembly