Installing the Keyboard
1.Connect the keyboard cables to its connectors on the keyboard controller card.
2.Place the keyboard door over its slot on the computer chassis.
3.Tighten the screws that secure the keyboard door to the computer chassis.
4.Align the keyboard into its slot on the computer.
5.Tighten the screws to secure the keyboard to the computer.
6.Install:
a. Battery
7.Follow the procedures in After Working Inside Your computer
Removing the Memory Module
1.Follow the procedures in Before Working Inside Your Computer
2.Remove:
a.Battery
b.Hard Drive
c.Optical Drive
d.Bottom Cover
3.Pry the securing clips away from the memory module until it pops up
4.Remove the memory module from its connector on the system board.
Installing the Memory Module
1.Insert the memory module into the memory socket.
2.Press the memory module down until it clicks into place.
3.Install:
a.Bottom Cover
b.Optical Drive
c.Hard Drive
d.Battery
4.Follow the procedures in After Working Inside Your computer
14
