Installing the Storage Connector

1.Place the storage connector on the computer.

2.Tighten the screws that secure the storage connector

3.Connect the storage connector cable to the computer.

4.Install:

a.Bottom Cover

b.Optical Drive

c.Hard Drive

d.Battery

5.Follow the procedures in After Working Inside Your computer

Removing the SSD Bracket

1.Follow the procedures in Before Working Inside Your Computer

2.Remove:

a.Battery

b.Hard Drive

c.Optical Drive

d.Bottom Cover

3.Perform the following steps as shown in the illustration:

a.Lift the locking tab [1].

b.Disconnect the SSD connector cable [2].

c.Remove the adhesive tape from the computer [3].

4.Perform the following steps as shown in the illustration:

a.Remove the screws that secure the SSD bracket to the computer [1].

b.Lift the SSD bracket from the computer [2].

28

Page 28
Image 28
Dell P46G owner manual Installing the Storage Connector, Removing the SSD Bracket