Installing the I/O Board | Dell P46G specification

Installing the I/O Board

1.Place the I/O board on the computer.

2.Tighten the scews that secure the I/O board to the computer.

3.Connect display assembly cable to the computer.

4.Connect the I/O cable to the computer.

5.Tighten the screw that secures the I/O board.

6.Slide the I/O board into its place on the computer.

7.Close the I/O bay press latch door.

8.Install:

a.Bottom Cover

b.Optical Drive

c.Hard Drive

d.Battery

9.Follow the procedures in After Working Inside Your computer

Removing the Storage Connector

1.Follow the procedures in Before Working Inside Your Computer

2.Remove:

a.Battery

b.Hard Drive

c.Optical Drive

d.Bottom Cover

3.Perform the following steps as shown in the illustration:

a.Lift the locking tab [1].

b.Disconnect the storage connector cable [2].

c.Remove the screw that secures the storage connector [3].

d.Lift the storage connector from the computer [4].

27

Image 27

Dell P46G owner manual Installing the I/O Board, Removing the Storage Connector

Contents

Dell Latitude 14 Rugged Page Contents Specifications Contacting Dell Before Working Inside Your Computer Working on Your Computer Turning Off Your Computer After Working Inside Your Computer Battery Removing the BatteryInstalling the Battery Follow the procedures in After Working Inside Your computer Installing the Hard Drive Battery Hard DriveRemoving the Optical Drive Battery Hard Drive Optical Drive Bottom Cover Installing the Optical DriveRemoving the Optical Drive Connector Installing the Optical Drive Connector Removing the Bottom Cover Battery Hard Drive Optical Drive Installing the Bottom Cover Removing the Keyboard Installing the Keyboard Installing the Memory ModuleRemoving the Memory Module Installing the Docking Board Battery Bottom CoverRemoving the Docking Board Installing the GPU Board Battery Hard Drive Optical Drive Bottom Cover Docking BoardRemoving the GPU Board Removing the SIM Module Installing the SIM Module Removing the Wwan Card Installing the Wlan CardBattery Hard Drive Optical Drive Bottom Cover GPS Holder Removing the Wlan Card Removing the GPS Holder Installing the Wwan Card Removing the Heatsink Installing the GPS Holder Removing the System Fan Installing the Heatsink Removing the RF Holder Installing the System Fan Removing the Display Assembly Installing the RF HolderPage Removing the I/O Board Installing the Display AssemblyPage Removing the Storage Connector Installing the I/O Board Removing the SSD Bracket Installing the Storage Connector Removing the USH Board Installing the SSD Bracket Installing the USH Board Installing the Driving BoardRemoving the Driving Board O Board Bottom Cover Optical Drive Hard Drive Removing the Battery ConnectorInstalling the Battery Connector Battery Hard Drive Optical Drive Bottom Cover O Board Removing the System Board Installing the System Board Navigation Keys Boot Sequence System Setup Options PS2 SATA-0 Video Page KEK Performance Page Post Behavior Wwan System and Setup Password Updating the Bios Assigning a System Password and Setup Password Page Enhanced Pre-Boot System Assessment ePSA Diagnostics Diagnostics Device Status Lights Battery Status Lights Specifications UMA Display Feature Specification Active Area Axis 99.5 mm 53 mm Auto-air Adapter Page Contacting Dell