Option | Description | |
|
|
|
|
| NOTE: This feature is only functional when the AC power adapter is |
|
| connected. If the AC power adapter is removed during Standby, the |
|
| system setup will remove power from all of the USB ports to |
|
| conserve battery power. |
| • Enable USB Wake Support | |
Wireless Radio Control | Allows you to enable or disable the feature that automatically switches | |
| from wired or wireless networks without depending on the physical | |
| connection. | |
| • | Control WLAN Radio |
| • | Control WWAN Radio |
Wake on LAN/WLAN | Allows you to enable or disable the feature that powers on the computer | |
| from the Off state when triggered by a LAN signal. | |
| • Disabled: This option is enabled by default | |
| • | LAN Only |
| • | WLAN Only |
| • | LAN or WLAN |
| • LAN with PXE Boot | |
Block Sleep | This option lets you block entering to sleep (S3 state) in Operating | |
| System environment. | |
| Block Sleep (S3 state) - This option is disabled by default. | |
Peak Shift | This option enables you to minimize the AC power consumption during | |
| the peak power times of day. After you enable this option, your system | |
| runs only in battery even if the AC is attached. | |
Advanced Battery Charge | This option enables you to maximize the battery health. By enabling this | |
Configuration | option, your system uses the standard charging algorithm and other | |
| techniques, during the | |
| Disabled (default) | |
Primary Battery Charge Configuration
Allows you to select the charging mode for the battery. The options are:
•Adaptive
•Standard
•ExpressCharge: This option is enabled by default.
•Primarily AC use
•Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option.
42
