Removing the WLAN Card
1. Follow the procedures in Before Working Inside Your Computer
2. Remove:
a. Battery
b. Hard Drive
c. Optical Drive
d. Bottom Cover
e. GPS Holder
3. Perform the following steps as shown in the illustration:
a. Disconnect the antenna cables from the WLAN card [1].
b. Remove the screw that secures the WLAN card [2].
c. Slide and lift the WLAN card from the slot [3].
Installing the WLAN Card
1. Insert the WLAN card in the slot.
2. Connect the screw to secure the cable holder.
3. Connect the antenna cables to the WLAN card.
4. Install:
a. GPS Holder
b. Bottom Cover
c. Optical Drive
d. Hard Drive
e. Battery
5. Follow the procedures in After Working Inside Your computer
Removing the WWAN Card
1. Follow the procedures in Before Working Inside Your Computer
2. Remove:
a. Battery
b. Hard Drive
c. Optical Drive
d. Bottom Cover
e. GPS Holder
18