Printing information pages

Printing a font sample list

To print samples of the fonts currently available for your printer:
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow buttons until Reports appears, and then press .
4Press the arrow buttons until Print Fonts appears, and then press .
5Press the arrow buttons until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and
then press .

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the arrow buttons until Reports appears, and then press .
4Press the arrow buttons until Print Directory appears, and then press .

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.
1Turn the printer off.
2Hold down and while turning the printer on.
3Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4Press the arrow buttons until Prt Quality Pgs appears, and then press .
The print quality test pages print.
5Press the arrow buttons until Exit Config Menu appears, and then press .
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
Printing
76