Menu item Description
Paper Source
Tray <x>
MP Feeder
Manual Paper
Manual Env
Sets a default paper source for all print jobs
Note: Tray 1 (standard tray) is the factory default setting.
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Stacks the pages of a print job in sequence when printing multiple copies
Note: On is the factory default setting.
Sides (Duplex)
2 sided
1 sided
Controls whether the job prints on one side or both sides of the paper
Note: 1 sided is the factory default setting.
Staple
Off
On
Specifies whether print jobs are stapled
Notes:
•This menu item is available only when the StapleSmart II Finisher is installed.
•Off is the factory default setting. Print jobs are not stapled.
Duplex Binding
Long Edge
Short Edge
Defines the way duplexed pages are bound and how the printing on the back of
the page is oriented in relation to the printing on the front of the page
Notes:
•Long Edge is the factory default setting.
•Long Edge specifies that binding be placed on the left edge of portrait pages
and the top edge of landscape pages.
•Short Edge specifies that binding be placed on the top edge of portrait pages
and the left edge of landscape pages.
Orientation
Auto
Long Edge
Short Edge
Specifies the orientation of a multiple-page sheet
Notes:
•Auto is the factory default setting. The printer chooses between portrait and
landscape.
•Long Edge uses landscape.
•Short Edge uses portrait.
N-up (pages-side)
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Specifies that multiple-page images be printed on one side of a sheet of paper
Notes:
•Off is the factory default setting.
•The number selected is the number of page images that will print per side.
N-up Border
None
Solid
Prints a border around each page image when using N-up (pages-side)
Note: None is the factory default setting.
Understanding printer menus
139