Environmental

Temperature:

Operating

10° to 35°C (50° to 95°F)

Storage

–40° to 65°C (–40° to 149°F)

Relative humidity

20% to 80% (noncondensing)

Maximum vibration:

 

Operating

0.25 G at 3 to 200 Hz at 0.5 octave/min

Storage

0.5 G at 3 to 200 Hz at 1 octave/min

Maximum shock:

 

Operating

bottom half-sine pulse with a change in velocity of 50.8 cm/sec

 

(20 inches/sec)

Storage

27-G faired square wave with a velocity change of 508 cm/sec

 

(200 inches/sec)

Altitude:

 

Operating

–15.2 to 3048 m (–50 to 10,000 ft)

Storage

–15.2 to 10,668 m (–50 to 35,000 ft)

System Setup

Overview

Use system setup as follows:

To change the system configuration information after you add, change, or remove any hardware in your computer

To set or change a user-selectable option such as the user password

To read the current amount of memory or set the type of hard drive installed

Before you use system setup, it is recommended that you write down the system setup screen information for future reference.

NOTICE: Do not change the settings in system setup unless you are an expert computer user. Certain changes can cause your computer to work incorrectly.

Specifications

101

Page 101
Image 101
Dell XPS 210 manual System Setup, Overview, 101, Inches/sec