Modem
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: Before you remove or install the modem, make sure to disconnect all telephone and network cables from your computer.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
Replacing the Modem
1Follow the procedures in "Before You Begin" on page 61.
NOTE: For easier access to the modem, it may be necessary to remove the power cable from the power connector on the system board (see "System Board Components" on page 65).
2
1
3
6 
5 |
4
1 | pull tab | 2 | modem cable | 3 | screws (2) |
4 | RJ11 internal connector | 5 | modem | 6 | |
| (RJ11INT) |
|
|
| to the modem cable |
Removing and Installing Parts
93
