Dell XPS 210 manual Back I/O Connectors, Green a good connection exists between a 10-Mbps network

Back I/O Connectors

1 2 3 4 5

6

7

	14	13	12	11	10	9	8
1	link integrity light		• Green — A good connection exists between a 10-Mbps network and the
			computer.
			• Orange — A good connection exists between a 100-Mbps network and the
			computer.
			• Off — The computer is not detecting a physical connection to the network.
2	network adapter		To attach your computer to a network or broadband device, connect one end of a
	connector		network cable to either a network jack or your network or broadband device.
			Connect the other end of the network cable to the network adapter connector on
			the back panel of your computer. A click indicates that the network cable has been
			securely attached.
			NOTE: Do not plug a telephone cable into the network connector.
			On computers with a network connector card, use the connector on the card.
			It is recommended that you use Category 5 wiring and connectors for your
			network. If you must use Category 3 wiring, force the network speed to 10 Mbps to
			ensure reliable operation.
3	network activity light		Flashes a yellow light when the computer is transmitting or receiving network
			data. A high volume of network traffic may make this light appear to be in a steady
			"on" state.
4	modem connector		Use the modem connector to connect your computer to the Internet.
5	rear surround sound		Use the black surround sound connector to attach multichannel-capable speakers.
	connector
6	line-in connector		Use the blue line-in connector to attach a record/playback device such as a cassette
			player, CD player, or VCR.
			On computers with a sound card, use the connector on the card.
7	line-out connector		Use the green line-out connector to attach headphones and most speakers with
			integrated amplifiers.

On computers with a sound card, use the connector on the card.

16

Setting Up and Using Your Computer