5
AFilter cap fastening hook
BAnti-odour filter cap
CLid
DInspection window (if provided)
EFilter inspection opening
FBasket
GHandle slider
HBasket handle
ILid opening button
LHandle for lifting appliance
MMinute timer (if supplied)
N Minute timer key (if supplied)
OPilot lamp
PSliding thermostat control/OFF switch
QDrainage tube panel (if provided)
RDrainage tube “easy clean system”
(if provided)
SCord holder (if provided)

DESCRIPTION OF THE APPLIANCE (pag. 2)

WARNING
SERIOUS HOT-OIL BURNS MAY RESULT
FROM A DEEP FRYER BEING PULLED OFF
A COUNTERTOP. DO NOT ALLOW THE
CORD TO HANG OVER THE EDGE OF
THE COUNTER WHERE IT MAY BE
GRABBED BY CHILDREN OR BECOME
ENTANGLED WITH THE USER. DO NOT
USE EXTENSION CORD.
DO NOT DRAPECORD!KEEP FROMCHILDREN!
IF YOUR DEEP FRYER IS SUPPLIED WITH A CORD SET WITH MAGNETIC CONNECTOR:
First fit the magnetic connector to the appliance, as
seen in Figure 13, making sure that the protruding part
of the connector “X” is correctly inserted in the corre-
sponding slot on the appliance, and then plug the
cable into the power outlet.
Warning
Never leave the appliance plugged into the power
outlet if the magnetic connector is not fitted to the deep
fryer, Figure 14.
If the magnetic connector does not remain in place,
check that it has been inserted correctly, see Figure 13.
If the problem persists, contact an authorised service
centre.
When the appliance is powered, always leave some
free space around the magnetic connector, so as to
prevent it from becoming detached.
Only use a type TA-35PA cord set supplied by De’lon-
ghi authorised service centres.
X
fig.13 fig.14
D6 16-01-2003 16:07 Pagina 5