DeLonghi ETAM36.365 manual Delivering HOT Water and Steam, Making milk based drinks automatically

No froth	FLAT WHITE/
	MILK (hot milk)
Min. froth	latte
Max. froth	CAPPUCCINO/
	MILK (frothed milk)

Making milk based drinks automatically

The FLAT WHITE, CAPPUCCINO, LATTE and MILK buttons on the control panel enable these drinks to be prepared automatically. Proceed as follows:

1.Fill the milk container and attach it as described above.

2.Turn the froth adjustment dial on the milk container lid to the position corresponding to the required froth.

3.Press the button corresponding to the required drink. The name of the drink selected is displayed together with a progress bar which gradually fills as preparation progress- es.

4.After a few seconds, frothed milk is delivered from the milk spout into the cup below.

For drinks with coffee, the machine automatically makes the coffee after delivering the milk.

Please note!

•If you want to interrupt preparation during delivery, press any button.

•At the end of delivery, to increase the quantity of milk or coffee in the cup, within three seconds, just press and hold the button corresponding to the cappuccino or milk based coffee being made.

•Do not leave the milk container out of the refrigerator for long periods. The warmer the milk (5°C is ideal), the poorer the quality of froth produced.

Clean the milk frother by using the CLEAN button

Important! Danger of burns

When cleaning the internal tubes of the milk container, a little hot water and steam leak out of the frothed milk spout.

Avoid contact with splashes of water.

“TURN DIAL TO CLEAN” flashes on the display each time you use a milk function. To eliminate all milk residues, proceed as follows:

1.Leave the milk container in the machine (you do not need to empty it);

2.Place a cup or other recipient under the frothed milk spout.

3.Turn the froth adjustment dial to“CLEAN”(fig. 25).“Clean-

ing underway, Please wait” is displayed, together with a progress bar which gradually fills as the operation pro- ceeds. Cleaning stops automatically.

4.Turn the dial back to one of the froth selections.

5.Remove the milk container and always clean the steam nozzle with a sponge (fig. 26).

Please note!

•To prepare a number of cappuccinos and milk based cof- fees, clean the milk container after you have prepared the last drink only.

•The milk container can be kept in the refrigerator.

•In some cases, to clean you must wait for the appliance to heat up.

Programming the quantity of coffee and milk in the cup for the FLAT WHITE, CAPPUCCINO, LATTE and MILK buttons

The appliance is set by default to automatically deliver stand- ard quantities. To change these quantities, proceed as follows:

1.Place a cup under the coffee spouts and milk spout.

2.Press and hold one of the function buttons until the mes- sage “Program quantity, PROGRAM MILK” is displayed.

3.Release the button. The appliance starts delivering milk.

4.Once the required quantity of milk has been delivered into the cup, press the button again.

5.The appliance stops delivering milk and, if required for the drink being prepared, after a few seconds the coffee is delivered into the cup. “Program quantity, PROGRAM COFFEE” is displayed.

6.Once the required quantity of coffee has been delivered into the cup, press the button again. Coffee delivery

stops.

The machine is now reprogrammed with the new milk and cof- fee quantities.

DELIVERING HOT WATER AND STEAM

Important! Danger of burns.

Do not leave the appliance unattended while hot water or steam is being delivered. The spout becomes hot during deliv- ery. Hold by the handle only.

Please note!

If “Energy saving” is active, you may have to wait a few seconds before hot water and steam are delivered.

Delivering hot water

1.Make sure the hot water spout is attached correctly (fig. 7).

2.Place a container under the spout (as close as possible to

14