Delta 37-071 instruction manual Table Of Contents, Important Safety Instructions

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS	2
SAFETY GUIDELINES - DEFINITIONS	3
GENERAL SAFETY RULES	3
ADDITIONAL SPECIFIC SAFETY RULES	4
POWER CONNECTIONS	6
MOTOR SPECIFICATIONS	6
GROUNDING INSTRUCTIONS	6
EXTENSION CORDS	7
KEY FEATURES AND COMPONENTS	7
FUNCTIONAL DESCRIPTION	7
PRODUCT SPECIFICATIONS	8
UNPACKING	8
ASSEMBLY	9
Fence Assembly	9
Fence Angle Lock Assembly	10
Align Cutterhead to Outfeed Table	10
Connecting to Dust Collector	11

OPERATION	12
Starting and Stopping the Jointer	12
Locking the Jointer Using the Safety Key	12
Adjusting Fence Position	12
Feeding Stock	13
Jointing Beveled Stock	13
Calibrating the 45°/90°/135° Stops	14
Depth Adjustment	15
MAINTENANCE	16
Changing the Cutter Knives	16
OTHER RECOMMENDED MAINTENANCE	16
ACCESSORIES	17
WARRANTY	17
REPLACEMENT PARTS	18
SERVICE AND REPAIRS	18
FRANÇAIS	20
ESPAÑOL	38

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock, fire,

and/or serious personal injury or property damage.

Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator may result. Safety equipment such

as guards, push sticks, hold-downs, featherboards, goggles, dust masks and hearing protection can reduce your potential for injury. But even the best guard won’t make up for poor judgment, carelessness or inattention. Always use common sense and exercise caution in the workshop. If a procedure feels dangerous, don’t try it. Figure out an alternative procedure that feels safer. REMEMBER: Your personal safety is your responsibility. For additional information please visit our website www.DeltaMachinery.com.

This machine was designed for certain applications only. DELTA® Power Equipment Corporation strongly recommends that this machine not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the

machine until you have first contacted DELTA® to determine if it can or should be performed on the product.

If you have any questions relative to its application DO NOT use the product until you have written DELTA® Power Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at Technical Service Manager, DELTA® Power Equipment Corporation, 99 Roush St., Anderson, SC 29625.

Information regarding the safe and proper operation of this tool is available from the following sources:

•Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.com

•National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201

•American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 Safety Requirements for Woodworking Machines

•U.S. Department of Labor regulations www.osha.gov

2